1.
Перед тим, як працювати вниз по свердлінням отвору, необхідна серія підготовчих робіт . По -перше, необхідно вибрати відповідний ділянку буріння та провести геологічне розвідку та гідрогеологічне обстеження, щоб визначити дискусію та напрямок буріння ., необхідно, необхідно врахувати та підтримувати вниз, щоб забезпечити його звичайну операцію {{2 Як свердловики, свердловики, гідравлічне масло, цемент тощо .
2. Встановіть свердловини та біти
Before drilling, it is necessary to install the drill rod and drill bit onto the down the hole drilling rig. Firstly, connect the drill rod to the drilling rig host and send it underground through the hydraulic system. Then, the drill bit is installed at the end of the drill rod and sent underground through a hydraulic system.
3. Почніть буріння
After the drill bit enters the underground, the down the hole drilling rig begins drilling. During the drilling process, it is necessary to continuously add hydraulic oil and cement to maintain the stability and strength of the borehole. At the same time, it is necessary to continuously monitor drilling data, such as drilling depth, drilling diameter, rock and soil layers, in order to conduct geological Дослідження та гідрогеологічні опитування .
4. Кінцеве буріння
Після завершення буріння, свердління та свердління потрібно вилучити з землі, очистити та підтримувати . одночасно, необхідно проаналізувати та обробляти дані про буріння для отримання інформації про ґрунтові води, геотермальну енергію, мінеральні ресурси тощо .}}}}}}}}
